Fire Prevention guide for electric heat pipes

Article Center: Lin Diao Hot/Xiaobian: Lin Diao Hot (Dongguan) Co., LTD


The electric heat pipe is currently the core component in many electrical equipment, in the application operation, Lin called the heat to remind the majority of consumers to pay attention to the electric heating equipment of the electric heat pipe to be wary of dry burning caused by fire accidents. Let's take a look at the common causes of fire and prevention measures.
First of all, let's analyze the reasons for the general fire of electric heating tubes:
1, the electric heater is placed near the combustible or flammable material, causing a fire under a long time of high temperature baking;
2, the electric heater is not installed plug, directly insert the wire head into the socket, which is easy to cause short circuit and fire;
3. The user does not unplug the electric heater when leaving, and the time is too long, causing the electric heater to overheat, igniting the adjacent combustible material and causing a fire;
4, the electric heating wire after repeated repair continue to use, can cause the line overload and cause fire. It is worth noting that the electric heating wire of the electric heater is made of nickel and chromium alloy, and the temperature is as high as 800 ° C or more. Because the power of the electric heater is relatively large, the user accidentally ignores the safety, and the fire may occur at any time.
Next, analyze the precautions to prevent the electric heater from catching fire
1, the wire must be installed plug, can not be directly inserted into the socket.
2, the electric heater wire aging damage should be replaced in time.
3, the electric heater without a fuse installed in the circuit shall not be used.
4, the electric heater must be supervised when it is used, the plug should be unplugged when leaving, in the process of use, in case of power failure, the plug should also be pulled out in time, do not forget.
5, for multiple repairs of the electric heating wire, it is best not to use, should be replaced with a new electric heating wire.
6. Flammable and explosive items are strictly prohibited from drying with electric heater.
7, the electric oven should have a temperature control device, not only to prevent the temperature is too high, but also to prevent baking time is too long.
Try not to put flammable and explosive items near the electric heating equipment, ensure the safety of the surrounding environment, do a good job of the maintenance and inspection of the electric heat pipe, so that it can play its due heating effect.



For more information, please contact: Lin Zhi Electric/Zhang Yu 18988721575