Introduction to threaded fixed single head pipe

1. Application

Thread mounted single head electric heat pipe structure: a hollow bolt with hexagonal head (for fastening) of different sizes is welded in the single head electric heat pipe connection. Can also be divided into hexagonal head up and down two kinds. Can be widely used to heat all kinds of liquid materials, can withstand pressure ≥0.8Mpa.

Ii. Characteristics

The factors affecting the electrical strength of the electric heat pipe mainly include the thickness of the insulation layer, the quality of the raw material of the insulation layer, the length of the electric heat pipe, the bending radius and the number of bending.

Third, the working principle

When heating the air, the elements should be crossed and evenly arranged, so that the elements have good heat dissipation conditions, so that the flowing air can be fully heated. The wiring part should be placed outside the insulation layer to avoid contact with corrosive, explosive media and water.

The wiring should be able to withstand the temperature and heating load of the wiring part for a long time, and the fastening of the wiring screws should avoid excessive force. The magnesium oxide powder at the outlet end of the electric heat pipe can avoid the infiltration of pollutants and water in the use place to prevent the occurrence of leakage accidents.

4. Technical parameters

The following surface load generally refers to the metal mold heating, water heating can be multiplied by 2 ~ 2.5. Air heating is 50% to 60%